Quelltext der Seite Network Management

== Prerequisites ==

Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.

=== Management via physical connection to the switch ===
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:

<pre>
IP: 10.10.99.1xx
Subnet mask: 255.255.255.0
Gateway: 10.10.99.1
DNS: 10.10.99.1
Domain: mgmt.fablab.local
</pre>

=== Remote management via VPN ===
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.

== Switching Infrastructure ==
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.

There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.

== WiFi Infrastructure ==
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.

The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]

== Firewall Infrastructure ==
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]

== NAS ==
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]