https://wiki.zurich.fablab.ch/api.php?action=feedcontributions&feedformat=atom&user=GandalfFabLab Zürich - Benutzerbeiträge [de]2026-04-18T09:10:11ZBenutzerbeiträgeMediaWiki 1.41.1https://wiki.zurich.fablab.ch/index.php?title=HP_Color_LaserJet_CP5225dn&diff=2593HP Color LaserJet CP5225dn2019-04-02T09:20:33Z<p>Gandalf: fix laser DNS name</p>
<hr />
<div><div class="mw-parser-output"><br />
== Netzwerk-Infos ==<br />
<br />
*DNS: flz-pr-02 <br />
*IP: 10.10.10.15 <br />
*Bonjour Dienstname: HP Color LaserJet CP5225dn (C06376) <br />
*Bonjour-Domänenname: flz-pr-02.local. <br />
</div><br />
<br />
== Standort ==<br />
<br />
Der grosse rechts neben Planet Knob Head<br />
<br />
== Papier ==<br />
A4 Fach2<br />
A3 Fach3<br />
<br />
== Anmerkungen ==<br />
<br />
Preise für A4 und A3 Drucke bitte aus der [[Preisliste]] einsehen</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=1702Internal Network2015-04-01T14:15:05Z<p>Gandalf: </p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 88 || DMZ || 10.10.88.0/24 || dmz.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
flz-pr-01 10.10.10.14<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
<br />
{| width="664"<br />
|-<br />
| '''Hosts:'''<br />
| Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
| '''Connection:'''<br />
| Physical link to specific VLAN port<br />
|-<br />
| '''Access:'''<br />
| Internet and intranet access based on firewall ruleset<br />
|}<br />
<pre>flz-lqf-01 10.10.88.10</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=1701Internal Network2015-04-01T14:14:35Z<p>Gandalf: </p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 88 || DMZ || 10.10.88.0/24 || dmz.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
flz-pr-01 10.10.10.14<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
<br />
{| width="664"<br />
|-<br />
| '''Hosts:'''<br />
| Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
| '''Connection:'''<br />
| Physical link to specific VLAN port<br />
|-<br />
| '''Access:'''<br />
| Internet and intranet access based on firewall ruleset<br />
|}<br />
<pre>flz-lqf-01 10.10.88.2</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=1700Internal Network2015-04-01T14:13:41Z<p>Gandalf: </p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 88 || DMZ || 10.10.88.0/24 || dmz.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
flz-pr-01 10.10.10.14<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
<br />
{|<br />
|-<br />
| '''Hosts:'''<br />
| Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
| '''Connection:'''<br />
| Physical link to specific VLAN port<br />
|-<br />
| '''Access:'''<br />
| Internet and intranet access based on firewall ruleset<br />
|-<br />
| '''Status:'''<br />
| Not yet implemented<br />
|}<br />
<pre>flz-lqf-01 10.10.88.2</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=395Hauptseite2015-01-08T20:02:39Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
=== <span style="font-size:larger"><span style="font-size:medium">Software</span></span> ===<br />
<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Software Übersicht über 2D- und 3D-Modellierungstools]<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Rhino Rhino] (3D Modelling)<br />
*[http://wiki.zurich.fablab.ch/index.php?title=RhinoCAM RhinoCAM] (CAM)<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Skanect Skanect] (3D Scanning)<br />
*...<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=391Hauptseite2014-11-26T01:21:08Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
=== <span style="font-size:larger"><span style="font-size:medium">Software</span></span> ===<br />
<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Software Übersicht über 2D- und 3D-Modellierungstools]<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Rhino Rhino] (3D Modelling)<br />
*[http://wiki.zurich.fablab.ch/index.php?title=RhinoCAM RhinoCAM] (CAM)<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Skanect Skanect] (3D Scanning)<br />
*...<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=390Hauptseite2014-11-26T01:20:04Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
=== <span style="font-size:larger"><span style="font-size:medium">Software</span></span> ===<br />
<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Software Übersicht über 2D- und 3D-Modellierungstools]<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Rhino Rhino]<br />
*[http://wiki.zurich.fablab.ch/index.php?title=RhinoCAM RhinoCAM]<br />
*[http://wiki.zurich.fablab.ch/index.php?title=Skanect Skanect] (3D Scanning Software)<br />
*...<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=389Hauptseite2014-11-26T01:17:31Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
=== <span style="font-size:larger"><span style="font-size:medium">Software</span><br/></span> ===<br />
<br />
*[http://wiki.zurich.fablab.ch/Software Übersicht über 2D- und 3D-Modellierungstools]<br />
*[http://wiki.zurich.fablab.ch/Rhino Rhino]<br />
*[http://wiki.zurich.fablab.ch/RhinoCAM RhinoCAM]<br />
*[http://wiki.zurich.fablab.ch/Skanect Skanect] (3D Scanning Software)<br />
*...<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=388Hauptseite2014-11-26T01:17:05Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
=== <span style="font-size:larger"><span style="font-size:medium">Software</span><br/></span> ===<br />
<br />
*[http://wiki.zurich.fablab.ch/Software Übersicht über 2D- und 3D-Modellierungstools]<br />
*[http://wiki.zurich.fablab.ch/Rhino Rhino]<br />
*[http://wiki.zurich.fablab.ch/RhinoCAM RhinoCAM]<br />
*[http://wiki.zurich.fablab.ch/Skanect Skanect] (3D Scanning Software)<br />
*...<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== Software ==<br />
<br />
*[[Software|Übersicht über 2D- und 3D-Modellierungstools]]<br />
*[[Rhino|Rhino]]<br />
*[[RhinoCAM]]<br />
*[[Skanect|Skanect]] (3D Scanning Software)<br />
*...<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=387Skanect2014-11-26T01:11:12Z<p>Gandalf: </p>
<hr />
<div>'''Was'''<br />
<br />
Die 3D Scan Software Skanect erlaubt es, mittels einer Xbox Kinect 3D Modelle aus realen Objekten, Personen oder Räumen zu erstellen.<br />
<br />
'''Wo'''<br />
<br />
Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
'''Wie'''<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv.<br />
<br />
Gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
'''Bugs'''<br />
<br />
*Gewisse Tasks sind in Skanect sehr rechen-intensiv sind und dauern entsprechend lang. Es kann passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu starten kann ("Ein Skanect Prozess läuft bereits" o.s.ä). Fix: Mit Strl-Alt-Entf (Task Manager) den "unsichtbaren" Task skanect.exe beenden, dann lässt es sich wieder starten<br />
*Aktuell keine GPU Unterstützung, obwohl die neuesten NVIDIA Treiber installiert..?<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=386Skanect2014-11-26T01:10:44Z<p>Gandalf: </p>
<hr />
<div>'''Was'''<br />
<br />
Die 3D Scan Software Skanect erlaubt es, mittels einer Xbox Kinect 3D Modelle aus realen Objekten, Personen oder Räumen zu erstellen.<br />
<br />
'''Wo'''<br />
<br />
Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
'''Wie'''<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv, gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
'''Bugs'''<br />
<br />
*Gewisse Tasks sind in Skanect sehr rechen-intensiv sind und dauern entsprechend lang. Es kann passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu starten kann ("Ein Skanect Prozess läuft bereits" o.s.ä). Fix: Mit Strl-Alt-Entf (Task Manager) den "unsichtbaren" Task skanect.exe beenden, dann lässt es sich wieder starten<br />
*Aktuell keine GPU Unterstützung, obwohl die neuesten NVIDIA Treiber installiert..?<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=385Skanect2014-11-26T01:09:13Z<p>Gandalf: </p>
<hr />
<div>'''Wo'''<br />
<br />
Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
'''Wie'''<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv, gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
'''Bugs'''<br />
<br />
*Gewisse Tasks sind in Skanect sehr rechen-intensiv sind und dauern entsprechend lang. Es kann passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu starten kann ("Ein Skanect Prozess läuft bereits" o.s.ä). Fix: Mit Strl-Alt-Entf (Task Manager) den "unsichtbaren" Task skanect.exe beenden, dann lässt es sich wieder starten<br />
*Aktuell keine GPU Unterstützung, obwohl die neuesten NVIDIA Treiber installiert..?<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=384Skanect2014-11-26T01:08:33Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv, gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
'''Bugs'''<br />
<br />
*Gewisse Tasks sind in Skanect sehr rechen-intensiv sind und dauern entsprechend lang. Es kann passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu starten kann ("Ein Skanect Prozess läuft bereits" o.s.ä). Fix: Mit Strl-Alt-Entf (Task Manager) den "unsichtbaren" Task skanect.exe beenden, dann lässt es sich wieder starten<br />
*Aktuell keine GPU Unterstützung, obwohl die neuesten NVIDIA Treiber installiert..?<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=383Skanect2014-11-26T01:05:12Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv, gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
'''Bugs'''<br />
<br />
Da gewisse Tasks in Skanect sehr rechen-intensiv sind und entsprechend lang dauern, kann es passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu startet ("Ein Skanect Prozess läuft bereits" oder so). Mit Strl-Alt-Entf (Task Manager) den "unsichtbaren" Task skanect.exe zu beenden, dann lässt es sich wieder starten<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=382Skanect2014-11-26T01:04:23Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv, gute Video-Tutorials gibt's hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
Da gewisse Tasks in Skanect sehr rechen-intensiv sind und entsprechend lang dauern, kann es passieren dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu startet ("Ein Skanect Prozess läuft bereits" oder so). Da hilft es, mit Strl-Alt-Entf (Task Manager) den Task skanect.exe zu beenden, dann geht es wieder.<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=381Hauptseite2014-11-25T23:43:42Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== Software ==<br />
<br />
*[[Software|Übersicht über 2D- und 3D-Modellierungstools]]<br />
*[[Rhino|Rhino]]<br />
*[[RhinoCAM]]<br />
*[[Skanect|Skanect]] (3D Scanning Software)<br />
*...<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=380Skanect2014-11-25T23:43:11Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls auf dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv (, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
Da gewisse Tasks in Skanect sehr rechen-intensiv sein können und entsprechend lang dauern kann es passieren, dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu startet ("Ein Skanect Prozess läuft bereits" oder so). Da hilft es, mit Strl-Alt-Entf (Task Manager) den Task skanect.exe zu beenden, dann geht es wieder.<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=379Skanect2014-11-25T23:32:38Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert.<br />
<br />
Gegebenenfalls ufm dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv (, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
Da gewisse Tasks in Skanect sehr rechen-intensiv sein können und entsprechend lang dauern kann es passieren, dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu startet ("Ein Skanect Prozess läuft bereits" oder so). Da hilft es, mit Strl-Alt-Entf (Task Manager) den Task skanect.exe zu beenden, dann geht es wieder.<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=378Skanect2014-11-25T23:20:05Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect ist auf der schwarz-silbernen "Power Workstation" ganz hinten links am Fenster installiert. <br />
<br />
Gegebenenfalls ufm dem kleinen KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur zu dieser Workstation umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte (herumlaufen) empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Für gute Scans sollte man ca. 60cm Abstand von der Kinect halten und immer schön im grünen Bereich bleiben, ansonsten ist die Scan-Software Skanect ist recht intuitiv (, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
Da gewisse Tasks in Skanect sehr rechen-intensiv sein können und entsprechend lang dauern kann es passieren, dass nach dem Beenden des Programmes im Hintergrund noch ein Skanect Bearbeitungs-Task weiterläuft der verhindert dass man das Programm neu startet ("Ein Skanect Prozess läuft bereits" oder so). Da hilft es, mit Strl-Alt-Entf (Task Manager) den Task skanect.exe zu beenden, dann geht es wieder.<br />
<br />
Now happy 3D scanning y'all!&nbsp;:)<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=377Skanect2014-11-25T21:20:00Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect auf der "Power Workstation" ganz am Fenster installiert, aufm dem KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Die Scan-Software Skanect ist recht intuitiv (immer schön im grünen Bereich bleiben, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br />
<br />
Now happy 3D scanning y'all! :)<br />
<br />
[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=376Skanect2014-11-25T21:19:27Z<p>Gandalf: </p>
<hr />
<div>Die 3D Scan Software Skanect auf der "Power Workstation" ganz am Fenster installiert, aufm dem KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Die Scan-Software Skanect ist recht intuitiv (immer schön im grünen Bereich bleiben, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]<br/>[[File:Skanect.jpg|none|1024x768px|Skanect.jpg]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Datei:Skanect.jpg&diff=375Datei:Skanect.jpg2014-11-25T21:17:40Z<p>Gandalf: </p>
<hr />
<div></div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Skanect&diff=374Skanect2014-11-25T21:15:47Z<p>Gandalf: Die Seite wurde neu angelegt: „Die 3D Scan Software Skanect auf der "Power Workstation" ganz am Fenster installiert, aufm dem KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatu…“</p>
<hr />
<div>Die 3D Scan Software Skanect auf der "Power Workstation" ganz am Fenster installiert, aufm dem KVM Switch Position 2 gedrückt halten um Monitor & Maus/Tastatur umzuschalten.<br />
<br />
Die Xbox Kinect braucht einen externen Power Injector, und für das Scannen grösserer Objekte empfiehlt sich ein USB-Verlängerungskabel.<br />
<br />
Die Scan-Software Skanect ist recht intuitiv (immer schön im grünen Bereich bleiben, gute Video-Tutorials gibt's sonst hier: [http://skanect.occipital.com/support/ http://skanect.occipital.com/support/]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=373Hauptseite2014-11-25T21:08:12Z<p>Gandalf: </p>
<hr />
<div>== Willkommen auf dem FabLab Zürich Wiki ==<br />
<br />
<flickr>14495553682</flickr><br />
<br />
Hier findet Ihr die technische Dokumentation zum Raum, den Werkzeugen und Kursen. Im Gegensatz zur [http://zurich.fablab.ch Website], wo es primär um Information gegenüber der "Aussenwelt" geht, darf und soll hier möglichst ausführlich zu unseren Maschinen, ihren Eigenheiten und Tweaks dokumentiert werden.<br />
<br />
HOWTOs und Projektdokumentationen passen hier natürlich auch rein.<br />
<br />
=== Website & Social Media ===<br />
<br />
*[http://zurich.fablab.ch Website]<br />
*[https://twitter.com/fablabzurich Twitter]<br />
*[https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Unsere Werkzeuge und Maschinen ==<br />
<br />
=== Digitale Fabrikation ===<br />
<br />
*[[CNC Fräse]]: VK-Technik PA1260<br />
*Laser Cutter: [[Epilog 36EXT]] & [[HPC LS3040]]<br />
*[[3D Drucker]]: Ultimaker & Kossel<br />
*[[Schneidplotter]]: Helo HSP-1360<br />
*2D Drucker<br />
**[[Brother HL-5040]] (A4 S/W Laser)<br />
**[[HP LaserJet 4050]] (A4 S/W Laser)<br />
**[[Xerox Phaser 7760GX]] (A3 Farblaser)<br />
<br />
=== Analoge Fabrikation ===<br />
<br />
*[[Bandsäge]]<br />
*[[Tischkreissäge]]<br />
*[[Standbohrmaschine]]<br />
<br />
=== Dokumentation ===<br />
<br />
*Spiegelreflexkamera [[NikonD90]]<br />
<br />
== Projekte ==<br />
<br />
Teile deine Projekte mit uns, mit allen!<br />
<br />
== Kurse ==<br />
<br />
[[AblaufKursorganisation|Von der Idee zum Kurs]]<br />
<br />
=== Einführungskurse ===<br />
<br />
*[[Fräskurs]]<br />
*[[LaserCutterEinführung|Laser Cutter Einführung]]<br />
*[[UltimakerEinführung|Ultimaker Einführung]]<br />
<br />
=== Workshops ===<br />
<br />
*[[Ultimaker bauen]]<br />
<br />
== Software ==<br />
<br />
*[[Software|Übersicht über 2D- und 3D-Modellierungstools]]<br />
*[[Rhino|Rhino]]<br />
*[[RhinoCAM]]<br />
*[[Skanect|Skanect]] (3D Scan)<br />
*...<br />
<br />
== FabCafé ==<br />
<br />
*[[Getränke]]<br />
<br />
== Behind the Scenes ==<br />
<br />
*[[FabLab IT]]<br />
<br />
== Getting started with MediaWiki ==<br />
<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
*[//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
*[//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
*[https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
*[//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
*[http://www.mediawiki.org/wiki/Extension:Flickr Integrate Flickr Photos]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Datei:Geierwalli.jpg&diff=261Datei:Geierwalli.jpg2014-10-28T16:57:01Z<p>Gandalf: </p>
<hr />
<div></div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Main_Page&diff=150Main Page2014-08-20T23:22:18Z<p>Gandalf: Gandalf verschob die Seite Main Page nach Hauptseite: switching to German as default language</p>
<hr />
<div>#WEITERLEITUNG [[Hauptseite]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=149Hauptseite2014-08-20T23:22:18Z<p>Gandalf: Gandalf verschob die Seite Main Page nach Hauptseite: switching to German as default language</p>
<hr />
<div>== Welcome to the FabLab Zurich Wiki ==<br />
<br />
This Wiki is primarily intended for technical documentation, e.g. HOWTOs and documentation about the various machines, the FabLab IT setup, project documentation etc.<br />
<br />
You can more general information on FabLab Zurich here:<br />
* [http://zurich.fablab.ch Homepage]<br />
* [https://twitter.com/fablabzurich Zwitter]<br />
* [https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Getting started with MediaWiki ==<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
* [//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
<br />
<br />
__TOC__ <br />
<br />
== Kurse ==<br />
* [[Fräskurs]]<br />
<br />
== FabLab Zurich Hardware ==<br />
* [[3D printer]]<br />
* [[Laser cutter]]<br />
* [[CNC mill]]<br />
* ... please complete!<br />
<br />
== FabLab Zurich Software ==<br />
* [[Rhino]]<br />
* [[RhinoCAM]]<br />
* ...<br />
<br />
== FabLab Zurich IT ==<br />
* [[Ethernet Cabling]]<br />
* [[Network Overview]]<br />
* [[The Rack]]<br />
* [[Internal Network]]<br />
* [[Internet Connectivity]]<br />
* [[Network Management]]<br />
* [[Configuration Management]]<br />
* [[Servers]]<br />
* [[Workstations]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Configuration_Management&diff=146Configuration Management2014-05-28T10:29:32Z<p>Gandalf: </p>
<hr />
<div>The configuration files of all devices can be found in [https://basecamp.com/1802942/projects/2603914/search?q=mgmt.fablab.local basecamp]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Configuration_Management&diff=145Configuration Management2014-05-28T10:28:41Z<p>Gandalf: </p>
<hr />
<div>The configuration files of all devices can be found in [basecamp https://basecamp.com/1802942/projects/2603914/search?q=mgmt.fablab.local]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Configuration_Management&diff=144Configuration Management2014-05-28T10:27:48Z<p>Gandalf: Created page with "The configuration files of all devices can be found within [basecamp|https://basecamp.com/1802942/projects/2603914/search?q=mgmt.fablab.local]"</p>
<hr />
<div>The configuration files of all devices can be found within [basecamp|https://basecamp.com/1802942/projects/2603914/search?q=mgmt.fablab.local]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=143Hauptseite2014-05-28T10:27:05Z<p>Gandalf: /* FabLab Zurich IT */</p>
<hr />
<div>== Welcome to the FabLab Zurich Wiki ==<br />
<br />
This Wiki is primarily intended for technical documentation, e.g. HOWTOs and documentation about the various machines, the FabLab IT setup, project documentation etc.<br />
<br />
You can more general information on FabLab Zurich here:<br />
* [http://zurich.fablab.ch Homepage]<br />
* [https://twitter.com/fablabzurich Zwitter]<br />
* [https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Getting started with MediaWiki ==<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
* [//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
<br />
<br />
__TOC__ <br />
<br />
== Kurse ==<br />
* [[Fräskurs]]<br />
<br />
== FabLab Zurich Hardware ==<br />
* [[3D Printer]]<br />
* [[Laser cutter]]<br />
* [[CNC mill]]<br />
* ... please complete!<br />
<br />
== FabLab Zurich Software ==<br />
* [[Rhino]]<br />
* [[RhinoCAM]]<br />
* ...<br />
<br />
== FabLab Zurich IT ==<br />
* [[Ethernet Cabling]]<br />
* [[Network Overview]]<br />
* [[The Rack]]<br />
* [[Internal Network]]<br />
* [[Internet Connectivity]]<br />
* [[Network Management]]<br />
* [[Configuration Management]]<br />
* [[Servers]]<br />
* [[Workstations]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=113Network Management2014-05-15T16:47:36Z<p>Gandalf: /* Remote management */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
=== Management via physical connection to the switch ===<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
</pre><br />
<br />
=== Remote management via VPN ===<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=112Network Management2014-05-15T16:47:26Z<p>Gandalf: /* Physical management connection to the switch */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
=== Management via physical connection to the switch ===<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
</pre><br />
<br />
=== Remote management ===<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=111Network Management2014-05-15T16:04:40Z<p>Gandalf: /* Physical connection to the switch */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
=== Physical management connection to the switch ===<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
</pre><br />
<br />
=== Remote management ===<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=110Network Management2014-05-15T16:04:25Z<p>Gandalf: /* Prerequisites */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
=== Physical connection to the switch ===<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
</pre><br />
<br />
=== Remote management ===<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=109Network Management2014-05-15T16:03:47Z<p>Gandalf: /* Prerequisites */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
</pre><br />
<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=108Network Management2014-05-15T16:03:38Z<p>Gandalf: </p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24. Given the lack of DHCP in the MGMT network, you will need to manually assign the following IP settings:<br />
<br />
<pre><br />
IP: 10.10.99.1xx<br />
Subnet mask: 255.255.255.0<br />
Gateway: 10.10.99.1<br />
DNS: 10.10.99.1<br />
Domain: mgmt.fablab.local<br />
<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=107Network Management2014-05-15T16:01:30Z<p>Gandalf: /* NAS */</p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24.<br />
<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas:5001 https://flz-nas.srv.fablab.local:5001]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=106Network Management2014-05-15T15:59:16Z<p>Gandalf: </p>
<hr />
<div>== Prerequisites ==<br />
<br />
Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24.<br />
<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.<br />
<br />
<br />
== Switching Infrastructure ==<br />
The core switches are manageable via SSL and SSH on their hostnames flz-sw-01 and flz-sw-02 respectively, or simply [https://flz-sw https://flz-sw.mgmt.fablab.local] for the one currently in operation.<br />
<br />
There are various unmanaged Netgear 5-port Gigabit switches spread across the room to be used as access switches.<br />
<br />
== WiFi Infrastructure ==<br />
WiFi is provided on 2.4 and 5 GHz by a Cisco/Linksys WRT610N running OpenWRT.<br />
<br />
The AP can be managed on [https://flz-ap https://flz-ap.mgmt.fablab.local]<br />
<br />
== Firewall Infrastructure ==<br />
The firewall can be managed on [https://flz-fw https://flz-fw.mgmt.fablab.local]<br />
<br />
== NAS ==<br />
The NAS can be managed on [https://flz-nas https://flz-nas.srv.fablab.local]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=105Internal Network2014-05-15T15:57:12Z<p>Gandalf: /* Service Network (VLAN 10: "SRV") */</p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 88 || DMZ || 10.10.88.0/24 || dmz.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
flz-pr-01 10.10.10.14<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
{|<br />
|'''Hosts:'''||Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Internet and intranet access based on firewall ruleset<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=104Internal Network2014-05-15T15:56:51Z<p>Gandalf: /* Overview */</p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 88 || DMZ || 10.10.88.0/24 || dmz.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
{|<br />
|'''Hosts:'''||Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Internet and intranet access based on firewall ruleset<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=103Internal Network2014-05-15T15:56:07Z<p>Gandalf: /* Network segments */</p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
<br />
=== VPN (VLAN -) ===<br />
{|<br />
|'''Hosts:'''||Admin access to FabLab network infrastructure<br />
|-<br />
|'''Connection:'''||OpenVPN connection to fireewall<br />
|-<br />
|'''Access:'''||Anyone with an OpenVPN profile and password<br />
|-<br />
|'''Restrictions:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
{|<br />
|'''Hosts:'''||Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Internet and intranet access based on firewall ruleset<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Internal_Network&diff=102Internal Network2014-05-15T15:54:43Z<p>Gandalf: /* Overview */</p>
<hr />
<div><br />
== Network topology ==<br />
<pre><br />
todo: create network topology diagram<br />
</pre><br />
<br />
== Network segments ==<br />
<br />
<br />
=== Overview ===<br />
For performance and security reasons, the internal network is segmented into the logical domains listed below.<br><br />
<br />
{|<br />
|'''VLAN'''||'''Name''' || '''Network''' || '''Subdomain'''<br />
|-<br />
| 10 || SRV || 10.10.10.0/24 || srv.fablab.local<br />
|-<br />
| 11 || LAN || 10.10.11.0/24 || lan.fablab.local<br />
|-<br />
| 13 || GUEST || 10.10.13.0/24 || guest.fablab.local<br />
|-<br />
| - || VPN || 10.10.23.0/24 || vpn.fablab.local<br />
|-<br />
| 69 || ATELIER || 10.10.69.0/24 || atelier.fablab.local<br />
|-<br />
| 99 || MGMT || 10.10.99.0/24 || mgmt.fablab.local<br />
|}<br />
<br />
Network segmentation is implemented via VLANs on the switch (layer 2: separation of collision domains) and separate IP subnets (layer 3: separation of broadcast domains)<br />
<br />
=== Service Network (VLAN 10: "SRV") ===<br />
{|<br />
|'''Hosts:'''||Internal services such as file servers, printers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Clients (from LAN & WLAN segment) are granted access to services through firewall based on ruleset<br />
|}<br />
<br />
<pre><br />
flz-dns-01 10.10.10.10<br />
flz-pos-01 10.10.10.11<br />
flz-nas-01 10.10.10.12<br />
flz-rpi-01 10.10.10.13<br />
</pre><br />
<br />
=== Client LAN (VLAN 11: "LAN") ===<br />
{|<br />
|'''Hosts:'''||Wired and wireless network clients, i.e. shared workstations, access switches, notebooks etc<br />
|-<br />
|'''Connection:'''||Access switches located across the FabLab or wireless connection to SSID "FabLab"<br />
|-<br />
|'''Access:'''||Anyone with physical access to FabLab and/or the wireless key<br />
|}<br />
<br />
<pre><br />
flz-cl-xx 10.10.11.100 - 199<br />
</pre><br />
<br />
<br />
=== Guest WLAN (VLAN 13: "GUEST") ===<br />
{|<br />
|'''Hosts:'''||External wireless network clients, i.e. visitor notebooks, smartphones<br />
|-<br />
|'''Connection:'''||Over the air: 2.4 and 5 GHz<br />
|-<br />
|'''Access:'''||Anyone in close proximity to FabLab<br />
|-<br />
|'''Restrictions:'''||Only allowed to connect to the internet, but no internal services<br />
|}<br />
<br />
<pre><br />
flz-gl-xx 10.10.13.100 - 199<br />
</pre><br />
<br />
=== Ateliergemeinschaft (VLAN 69: "ATELIER") ===<br />
{|<br />
|'''Hosts:'''||Ateliergemeinschaft in the former location of FabLab<br />
|-<br />
|'''Connection:'''||Physical link through wall behind the rack<br />
|-<br />
|'''Access:'''||Anyone with physical access to the Ateliergemeinschaft<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Demilitarized Zone (VLAN 88: "DMZ") ===<br />
{|<br />
|'''Hosts:'''||Internet services like website test and dev environments, Diaspora pods, personal internet hosts etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Internet and intranet access based on firewall ruleset<br />
|-<br />
|'''Status:'''||Not yet implemented<br />
|}<br />
<br />
<pre><br />
tbd<br />
</pre><br />
<br />
=== Management Network (VLAN 99: "MGMT") ===<br />
{|<br />
|'''Hosts:'''||Network equipment, server out-of-band management interfaces, serial console servers etc<br />
|-<br />
|'''Connection:'''||Physical link to specific VLAN port<br />
|-<br />
|'''Access:'''||Network and systems admins only<br />
|}<br />
<br />
<pre><br />
flz-fw-01 10.10.99.1<br />
flz-fw-02 10.10.99.2<br />
flz-sw-01 10.10.99.11<br />
flz-sw-02 10.10.99.12<br />
flz-ap-01 10.10.99.21<br />
</pre><br />
<br />
== General network config ==<br />
The gateway (i.e. the firewall) is always located at IP 10.10.x.1, and is currently also acting as the central DHCP, DNS and NTP server, as well as an Avahi (bonjour) proxy.<br />
<br />
The various subnets are within the private 10/8 range defined by RFC 1918. The local supernet is 10.10/16, subnetted into various /24 networks.<br />
<br />
The third octet of the address always corresponds to the VLAN ID of the respective network.<br />
<br />
=== DHCP settings ===<br />
{|<br />
|'''Range:''' || 10.10.[VLAN].100 - 199<br />
|-<br />
|'''Subnet mask:'''|| 255.255.255.0<br />
|-<br />
|'''Gateway:''' || 10.10.[VLAN].1<br />
|-<br />
|'''DNS:''' || 10.10.[VLAN].1<br />
|-<br />
|'''NTP:''' || 10.10.[VLAN].1<br />
|-<br />
|'''Domain:''' || fablab.local (to make DNS entries unter .fablab.local directly accessible because Windows does not seem to properly respect domain search lists provided by DHCP)<br />
|}<br />
<br />
DHCP service is provided on LAN, WLAN and GUEST (the latter getting assigned external nameservers)<br />
<br />
=== DNS ===<br />
The central DNS server, providing forward and reverse name resolution for the various internal networks is implemented using ISC bind running on the local firewall. <br />
In order to make things a bit easier, the internal domain fablab.local has DNS aliases (CNAMEs) pointing to the various servers, e.g. fablabnas.fablab.local is actually a DNS CNAME pointing to flz-nas-01.srv.fablab.local, the 'real' name of the NAS device. <br />
This way, clients can simply reach all services by using their hostnames (e.g. 'ping fablabnas')</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Network_Management&diff=101Network Management2014-05-15T15:53:39Z<p>Gandalf: Created page with "Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24. There's a dedicated management port on the switch, i.e. an (untagge..."</p>
<hr />
<div>Management of all network devices is restricted to the management network MGMT, VLAN 99, IP 10.10.99.0/24.<br />
<br />
There's a dedicated management port on the switch, i.e. an (untagged) assignment to VLAN 99 on core switch port 24.<br />
<br />
In order to manage the FabLab network infrastructure from anywhere, an OpenVPN access is required.<br />
The OpenVPN client will get an IP within the subnet 10.10.23.0/24, which on the firewall is allowed to access all networks. Therefore, this VPN should be restricted to authorized admins only.</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Hauptseite&diff=100Hauptseite2014-05-15T15:50:54Z<p>Gandalf: /* FabLab Zurich IT */</p>
<hr />
<div>== Welcome to the FabLab Zurich Wiki ==<br />
<br />
This Wiki is primarily intended for technical documentation, e.g. HOWTOs and documentation about the various machines, the FabLab IT setup, project documentation etc.<br />
<br />
You can more general information on FabLab Zurich here:<br />
* [http://zurich.fablab.ch Homepage]<br />
* [https://twitter.com/fablabzurich Zwitter]<br />
* [https://www.facebook.com/fablabzurich Facebook]<br />
<br />
== Getting started with MediaWiki ==<br />
In case you're unfamiliar with MediaWiki, consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software, or have a look at the following pages:<br />
<br />
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]<br />
* [//www.mediawiki.org/wiki/Localisation#Translation_resources Localise MediaWiki for your language]<br />
<br />
<br />
__TOC__ <br />
<br />
== FabLab Zurich Hardware ==<br />
* [[3D Printer]]<br />
* [[Laser cutter]]<br />
* [[CNC mill]]<br />
* ... please complete!<br />
<br />
== FabLab Zurich IT ==<br />
* [[Ethernet Cabling]]<br />
* [[Network Overview]]<br />
* [[The Rack]]<br />
* [[Internal Network]]<br />
* [[Internet Connectivity]]<br />
* [[Network Management]]<br />
* [[Servers]]<br />
* [[Workstations]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=The_Rack&diff=99The Rack2014-05-15T15:50:01Z<p>Gandalf: </p>
<hr />
<div>The rack housing the IT infrastructure is located on the right of the entrance door when coming into FabLab:<br />
<br />
[[File:Flz-rack.jpg|300px]]<br />
<br />
The network equipment is located at the top of the rack.<br />
At the very top, there's a 24-port RJ45 patch panel terminating the cables going to the various wall sockets in the room. Next comes the internet infrastructure provided by Dataway, the firewall and switching infrastructure:<br />
<br />
[[File:Flz-rack network.jpg|300px]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=The_Rack&diff=98The Rack2014-05-15T15:49:42Z<p>Gandalf: </p>
<hr />
<div>The 19'' rack housing the IT infrastructure is located on the right of the entrance door when coming into FabLab:<br />
<br />
[[File:Flz-rack.jpg|300px]]<br />
<br />
The network equipment is located at the top of the rack.<br />
At the very top, there's a 24-port RJ45 patch panel terminating the cables going to the various wall sockets in the room. Next comes the internet infrastructure provided by Dataway, the firewall and switching infrastructure:<br />
[[File:Flz-rack network.jpg|300px]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=The_Rack&diff=97The Rack2014-05-15T15:48:30Z<p>Gandalf: </p>
<hr />
<div>The 19'' rack housing the IT infrastructure is located on the right of the entrance door when coming into FabLab:<br />
[[File:Flz-rack.jpg|300px]]<br />
<br />
Network equipment is located at the top of the rack:<br />
[[File:Flz-rack network.jpg|300px]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Ethernet_Cabling&diff=96Ethernet Cabling2014-05-15T15:46:44Z<p>Gandalf: /* Gebäudeverkabelung */</p>
<hr />
<div><br />
== Gebäudeverkabelung ==<br />
<br />
There are 12 permanently installed Ethernet links going from various wall sockets in the room to the rack, ending up on the black 24-port patch panel at the very top.<br />
Different quality of cable was use (some CAT6, some shielded CAT5, some CAT5 UTP), so your high-frequency (i.e. Gigabit) mileage may vary.<br />
<br />
The wall sockets are all labeled, the labels corresponding the the number on the patch panel:<br />
<br />
[[File:Flz-gebaeudeverkabelung.jpg|300px]]<br />
<br />
Socket number 10 is located in the middle of the room near the ceiling on the cable rails. This port carries the VLANs to the access point:<br />
<br />
[[File:Flz-ap.jpg|300px]]<br />
<br />
<br />
The ports on the patch panel are then patched into the first core switch flz-sw-01.mgmt.fablab.local, again with the port numbers corresponding to the numbers on the wall sockets. Assignments of ports to specific VLANs happen inside the switch, see [[Internal Network]]</div>Gandalfhttps://wiki.zurich.fablab.ch/index.php?title=Ethernet_Cabling&diff=95Ethernet Cabling2014-05-15T15:46:25Z<p>Gandalf: /* Gebäudeverkabelung */</p>
<hr />
<div><br />
== Gebäudeverkabelung ==<br />
<br />
There are 12 permanently installed Ethernet links going from various wall sockets in the room to the rack, ending up on the black 24-port patch panel at the very top.<br />
Different quality of cable was use (some CAT6, some shielded CAT5, some CAT5 UTP), so your high-frequency (i.e. Gigabit) mileage may vary.<br />
<br />
The wall sockets are all labeled, the labels corresponding the the number on the patch panel.<br />
<br />
[[File:Flz-gebaeudeverkabelung.jpg|300px]]<br />
<br />
Socket number 10 is located in the middle of the room near the ceiling on the cable rails. This port carries the VLANs to the access point.<br />
<br />
[[File:Flz-ap.jpg|300px]]<br />
<br />
<br />
The ports on the patch panel are then patched into the first core switch flz-sw-01.mgmt.fablab.local, again with the port numbers corresponding to the numbers on the wall sockets. Assignments of ports to specific VLANs happen inside the switch, see [[Internal Network]]</div>Gandalf